SPOT COOLER - Cold air for industrial cooling problems / replace messy mist                       systems, improve dry machining - WITH NO MOVING PARTS.

CABINET COOLER - Stop electronic control downtime due to heat, dirt and                            moisture

What Is a Spot cooler?

A low cost, reliable, maintenance-free solution to a variety of industrial spot cooling problems. Using an ordinary supply of compressed air as a power source, vortex tubes create a jet of cold, with no moving parts. Temperatures, flows and refrigeration are adjustable over a wide range using the control valve. The wear resistance of stainless steel, as well as its resistance to corrosion and oxidation, assures years of reliable, maintenance-free operation. ` Spot cooler can produce Temperatures from -4° to + 30°C) / Flow rates from 1 to 150 SCFM / Refrigeration up to 10,200 Btu/hr. (2571 Kcal/hr.)

Setting / Controlling Temperature and Flow in a Spot cooler Setting a vortex tube is easy. Simply insert a thermometer in the cold air exhaust and set the temperature by adjusting the valve at the hot end. Opening the valve reduces the cold airflow and temperature. Closing the valve increases the cold airflow and temperature. Most industrial applications, i.e., process cooling, Tool / part cooling, chamber / cabinet cooling, require the 3200 series spot coolers. Certain applications, i.e., cooling lab samples, circuit testing, are best served by the ''Cryogenic'' model of spot coolers.