Jets / Nozzles - Reduce noise level and air cost on blowoff operations.

Why Air Jets And Nozzles?

Safe And Efficient Use Of Compressed Air for blowoff in most facilities is a problem due to the energy costs, noise level and potential danger to personnel who are exposed to high pressure air. Open air pipes, copper tubes and drilled pipes are a few of the common abusers. They consume tremendous amounts of energy and often produce noise levels over 100 dBA.

Air savings, using nozzles / jets compared to open copper tubes or pipe nipples commonly used for blowoff can be as high as 80%. Less compressed air means less noise. Typical noise level reduction is 10 dBA. All Air Jets and Nozzles meet OSHA maximum dead ended pressure requirements

Reduce Energy Costs and Noise Levels
Energy savings can be realized by replacing outdated blow off devices with efficiency models that often pay for themselves in a short period of time. Using engineered products like Air Nozzle / Jets can cut operating costs since it uses only a fraction of the compressed air of typical blow offs. In addition, all of the Air Jets and Nozzles can be cycled on and off with instantaneous response so compressed air is used only when needed.

High noise level is a common problem for many plants. Compressed air noise often results in hearing loss to those working in close proximity. Noise levels can be reduced to only 74 dBA when using the Air Nozzle. Without comprising on ‘’force’’ requirements.